[Ducati] RE: new subject . . any ideas

[Alec Moss]

Put a little dab of grease on your fingertip and use that to hold the nut
until the threads do.


Alec


On 1/27/08 8:24 AM, "fhecker at earthlink.net" <fhecker at earthlink.net> wrote:

> greetings earthlings,
>     
>     Hopper, the nuts on my 900SS micro switch measure 4mm across the flats.
> Could be an M2 size with a 0.4 pitch.  Got a 1/4" drive 4mm socket? Stuff a
> little wad of paper into it and put the nut in far enough so it doesn't fall
> right out. Too deep and the threads won't grab the nut.
> Maybe a little light holding  Loctite?  Good luck.  Also a  5/32" socket,
> 0.156",  might work, too.
> 
> ciao, 
> Fred 
> fhecker at earthlink.net
> EarthLink Revolves Around You.
> *****
> 
> Our newest sponsor, MC Stands, has just opened its doors!  It's a motorcycle
> stand superstore.  Every brand, every model, 95% in stock for immediate
> shipment. Whether front stands, rear stands, paddock stands, dirt bike
> stands, or any kind of stand or lift, MC Stands tests, rates, and discounts
> everything they sell.  Check them out!
> 
> Visit: http://mcstands.com/
> _______________________________________________
> Ducati mailing list
> Ducati at ducati.net
> http://list.ducati.net/cgi-bin/mailman/listinfo/ducati
> Mailto: amoss at coastside.net
>