[Ducati] Brembo Ft. Master Cylinder - Parts Availability?

[Corey Levenson]

You might try these folks:

http://www.tawvehicle.com/brembo_home.htm

They seem to have everything Brembo...
-- 
Corey Levenson
San Antonio TX
"When the going gets weird, the weird turn pro" - Raoul Duke

On Tue, Apr 1, 2008 at 7:59 AM, John <jmagrann at ca.rr.com> wrote:

> Greetings,
>
> Bike in question is a 1995 916.
>
> I had my first incident at a local track day.  Low-speed, front end slide
> out on cold tires, going down on the right side.  This was at Streets of
> Willow, first session after lunch.  Lesson learned.
>
> I was lucky as I had frame sliders installed and 'track plastic'. The bike
> slid and did not tumble.
>
> One thing that got damaged, was the brake fluid reservoir 'nipple' on the
> front master cylinder.  This is a 90 degree, black plastic piece that the
> hose attaches to.  It's cracked at the base, leaking fluid.  In the
> attached
> picture, it'd dead center.  You can just make out the crack.
>
> My questions:
>
> 1) Are the replacement parts available for just the plastic fitting?  I
> can't find anything on the internet.
>
> 2) I'm not seeing the same cylinder on eBay (I'm guessing I've got a very
> early unit).  Can I safely assume the 'newer' pieces will bolt up?  (same
> banjo fittings, hose lengths the same)
>
> Thanks, in advance for any help or advice.
>
> John Magrann
>
> '95 916
> '96 900 SS/SP
>
>  *****
>
> Ducati.net is sponsored by Oncycles.com, who has the largest selection and
> lowest prices, on the finest motorcycle products anywhere, all served with
> world-class customer service.  Check them out!
> _______________________________________________
> Ducati mailing list
> Ducati at ducati.net
> http://list.ducati.net/cgi-bin/mailman/listinfo/ducati
> Mailto: corey.levenson at gmail.com
>