[Ducati] LED help

[MS&F]

If the flasher relay needs42W to make itflash atthe correctrate, why 
notjustdd a 3 or a 3.5 ohm resistor at the relay, then there is no need 
to fiddle at the indicator.
Stuart
>
> I did a back-of-fag-packet calculation (quite tricky for a non-smoker)
> and 6 ohm should be OK. You would need to put a resistor connected in
> parallel (across) with each indicator LED. You may need to do the same
> with your rears even if they were working OK before. The flasher relay
> needs to have a load of c. 42W to flash at correct rate, a 6 ohm
> resistor front and back should achieve this. HTH, Brian
>