[Ducati] LED help

[Jones, Brian A]

BJC,

I did a back-of-fag-packet calculation (quite tricky for a non-smoker)
and 6 ohm should be OK. You would need to put a resistor connected in
parallel (across) with each indicator LED. You may need to do the same
with your rears even if they were working OK before. The flasher relay
needs to have a load of c. 42W to flash at correct rate, a 6 ohm
resistor front and back should achieve this. HTH, Brian


This message and any attachments are confidential, for the exclusive use of the addressee and may be legally privileged.  Any other distribution, use or reproduction is unauthorised and prohibited.  If you have received this message in error, please notify the sender immediately and delete this message from your system.
 
 
Registered in England:
Registered Office:  Prescot Road, St Helens, Merseyside WA10 3TT
VAT Number:  GB151 6225 91
 
NSG UK Enterprises Limited				Company Number: 5584873
Pilkington Group Limited					Company Number: 41495
Pilkington AG Limited  			
                  Company Number: 02025098
Pilkington Automotive Limited				Company Number: 2803344
Pilkington Finance Limited				Company Number: 2108141
Pilkington (Forex) Limited				Company Number: 522640
Pilkington Italy Limited					Company Number: 438269
Pilkington Properties Limited				Company Number: 142655
Pilkington Special Glass Limited				Company Number: 1417548
Pilkington United Kingdom Limited			Company Number: 1417048 
Pilkington Aintree Limited					Company No. is 5247553

Registered in Scotland:
Registered Office:  Kintyre House, 209 West George Street, Glasgow  G2 2LW
 
Pilkington Technology Management Limited		Company Number: 38385