[Ducati] LED help

[PoorDucRider]

I have had a few good ideas thrown my way but think I didnt indicate my 
problem clearly. It isnt a too fast blink rate.... I have NO blink. They 
just come on when activated - resistors or not. Hope this aids in 
diagnoses.... Thanks to all.
BJC

----- Original Message ----- 
From: "John Sheerin" <jsheerin79 at gmail.com>
To: "Ducati Owners Group" <ducati at ducati.net>
Sent: Thursday, April 03, 2008 8:02 PM
Subject: Re: [Ducati] LED help


> The other thing you can do (in general) is pop open the flasher relay,
> look at the chip, look up the data sheet, and substitute resistor
> values until you change the 'error' blink rate to something
> reasonable.  I subbed a flasher relay on my 748 from Napa and did
> this.  It was way cheaper and faster than ordering the one for the
> bike.  Also, I'd eventually like to get the LED lights (or make my
> own), and one of the benefits of this that I say is reduced current
> draw in operation.  That doesn't happen if you put in load resistors.
>
> John
> http://ldsg.snippets.org/HORNS/ducati.html
>
> *****
>
> Ducati.net is sponsored by Oncycles.com, who has the largest selection and
> lowest prices, on the finest motorcycle products anywhere, all served with
> world-class customer service.  Check them out!
> _______________________________________________
> Ducati mailing list
> Ducati at ducati.net
> http://list.ducati.net/cgi-bin/mailman/listinfo/ducati
> Mailto: bjc at poorducrider.com
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.519 / Virus Database: 269.22.1/1352 - Release Date: 3/31/2008 
> 10:13 AM
>