[Ducati] 2 into 1 exhaust for 900SS?

[Matthew Meads]

Hello I have been making Ducati race pipes for some time now and  have
found just as Brad siad but when it come to the 750 motor a 2 to 1 works
heaps better but you must run a reverse cone with short last cone and
baffle after last cone.

 

 

Message: 5

Date: Fri, 23 Nov 2007 22:22:35 +1100

From: "Kerry and Brad Black" <bikeboy at alphalink.com.au>

Subject: Re: [Ducati] 2 into 1 exhaust for 900SS?

To: "Ducati.Net" <ducati at ducati.net>

Message-ID: <002301c82dc3$260a6ff0$6501a8c0 at bradpw5kkbszbp>

Content-Type: text/plain; charset="iso-8859-1"

i doubt you'll find anyone anywhere with a 2-1 that works as well as a
good spaghetti system, and even less chance of finding dyno charts for
it.

my guessing would be if it's a small 2-1 it'll help the midrange and
hurt the top end. if it's a big 2-1 it'll be the other way around. but
like most i'm just speculating.

spend the money on guy's heads and leave it at that.

brad



DISCLAIMER:
This email contains confidential information and may be legally privileged. If you are not the intended recipient or have received this email in error, please notify the sender immediately and destroy this email.
You may not use, disclose or copy this email or its attachments in any way.
Any opinions expressed in this email are those of the author and are not necessarily those of the Fonterra Co-operative Group.
http://www.fonterra.com/