[Ducati] 900SS Starter Solenoid triger Voltage

[Art Ramos]

Start cleaning first!

Art


On 3/11/07, Eric Ducdude <Ducdude at verizon.net> wrote:
>
> I rolled my  78K mile 94 900SS out of the garage, turned on the ignition
> she
> cranked a few times and then proceeded to burn out her starter
> solenoid....:-(  I can still start the bike by jumping the Solenoid or
> push
> starting it.
>
> After a little investigation...
>
> The question:
> The trigger voltage at the two wire plug that goes to the starter solenoid
> puts out around 10.34 Vdc when the starter button is pushed while the
> battery reads 13.23Vdc with the bike not running. ( Hawker Odyssey
> battery)
>
> The trigger voltage on my 97 748 reads 11.54 Vdc when the batt is holding
> 11.98Vdc.
>
> I did swap the solenoids between bikes and the 900's is still dead but is
> 10.34 Vdc and acceptable voltage trigger level on the 900or should I start
> cleaning connectors all around or keep looking?
>
> Thanks,
> Eric
> Jenkintown, PA
>
>
>
>
>
>
> *****
>
> Our sponsor, oncycles.com, is extending a one-time, limited-time offer
> that's too good to miss.  $17 buys the new 2007 Moto Millennia catalog, a
> $15 credit + free shipping for a year at oncycles.com, plus a year's
> subscription to Robb Report Motorcycling, Road Racer X, and Two Wheel
> Tuner
> magazines.  All of it for $17.  Check it out!
>
> Visit http://www.oncycles.com/
>
> _______________________________________________
> Ducati mailing list
> Ducati at ducati.net
> http://list.ducati.net/cgi-bin/mailman/listinfo/ducati
> Mailto: hyperpastabiker at gmail.com
>



-- 
Art Ramos

2005 999R
1999 996 Mono (Frankenduc)
1999 944 SSie (Angryduc)
www.hyperpastabiker.net