[Ducati] 900 SS Clutch Question [more]

[dav0 Lieby]

I have a '96 M900.  The clutch started slipping a little and making a
lot of noise when I was releasing it.  I got a Barnett pack, just the
plates for the inside and springs that were stronger, and have not had
any problem since.  At the time the bike had about 15K miles.

I have a couple of friends who went for an after market slave that has
a bigger Outside Diameter and they reported having a lot of trouble
finding neutral when stopped.  I got an inside cylinder for the slave
that has an extra "O" ring so it will not wear out the ring that works
too soon and while it has a harder pull with the stiffer springs I
love it.  And on top of that I can find neutral easily, all the time.

I cut up the cover for the clutch so that you can hear it real good,
it may be cooler but I cannot tell.  I also hand polished the pressure
plate that came on the bike, it looks very nice and just took a little
time and some dremmel pads.

Life is good on a 900.

dav0
-- 
You can never have a dull time if you somehow manage to say the wrong thing.