[Ducati] 907 swingram issue ??

[Brian Conner]

About 150 miles ago the upper mounting bolt on the rear brake master 
cyclinder started to rub my swingarm.  I assumed that since the bike had 
been knocked over on the right after a BMW fell on it and I low sided once 
on the right, the footpeg stay/brake reservior bracket had been bent.  Now 
both of these accidents happened years ago and there has been no problem 
until now.  I bought a new bracket from Ducati and that turned out not to be 
the issue.  I also dropped my shock linkage to get a feel if the swingarm 
was moving side to side but neither I or a buddy was able to get it to budge 
at all.

Any ideas what would cause this to suddenly rub????

Thanks.



Brian
'04 Kawasaki KX 250F
'93 888 SPO
'92 907ie
'74 Laverda SF2

Dylan
'05 RM85
Sponsored By:
Fay Myers Motorsports
Engine Ice -- coolant
Factory Effex -- graphics
Vortex -- chains & sprockets
Race Tech -- suspension
EVS -- protective gear
Twin Air -- filters
DeCal Works -- decals & apparel
TAG Metals -- handlebars

http://www.bc.smugmug.com