[Ducati] 900SS Damper

[Wright, Dirk]

It isn't clear that the spacer is made from metal. It is black in color in the Haynes manual. The cap has to be unscrewed from a rod that runs down the spring. In order to pull out the complete assembly, you have to unscrew something at the bottom of the fork also. I only need to replace the spring, so I didn't study that aspect closely. 

-----Original Message-----
From: ducati-bounces at ducati.net [mailto:ducati-bounces at ducati.net]On
Behalf Of Rich Roberts
Sent: Tuesday, May 02, 2006 12:10 PM
To: Ducati Owners Group
Subject: RE: [Ducati] 900SS Damper


On use of PVC, I always sand edges, deburring of all loose or potentially loose material. Once cleaned up of all rough edges should be fine. I cut in 1/4" increments as even a 1/4" is noticeable. Sorry spacer is at bottom of Marzocchi's, bummer. But should be just take top loose extract spring and instead of on top of spring it is under spring..right? So use  one of those magnet extension retraction thingies to get it out. Rich

"Wright, Dirk" <Dirk.Wright at USPTO.GOV> wrote:  Hi Dave, I now have the Haynes manual for my bike and I do have Marzocchi forks. The spacer is at the bottom and requires significant disassembly to access. I have found a source that is willing to work with me and I will be buying a new set of stiffer springs from him. I just have to figure out how I'm going to support the bike while taking the fork springs out. I need a sky hook, got one? 

-----Original Message-----
From: ducati-bounces at ducati.net [mailto:ducati-bounces at ducati.net]On
Behalf Of Dave Verrecchia
Sent: Tuesday, May 02, 2006 12:44 AM
To: Ducati Owners Group
Subject: RE: [Ducati] 900SS Damper


They are the same diameter fork legs whether or not they Marzocchi or Showa, so it doesn't matter. If you measure the springs, you can get anything from Race Tech to Ohlins for them. 

You can also use PCV pipe as a pre-load tool. You basically cut it in different heights to vary the pre-load (like 1/2", etc... a little bit makes a big difference). This is ghetto, oakland style, but it works and people have done this for years... but there maybe be something with PVC flaking off and getting into the fork oil.

I was originally repsonding saying Munroe has 2 steering dampers for 1994-1998 SS's in stock. They are pretty trick, red-anodized from Italy... they'd probably sell them cheap... email me off list if you are intersted.

Dave V

"Wright, Dirk" wrote:Racetech doesn't list my bike in its product index. I do not know if I have Showa or Marzocchi forks. I have read references that say either could have been used. There doesn't appear to be any maker's mark on them. They are unadjustable, that's all I know. I sent Racetech an email asking about stiffer springs. Hopefully they will have some that will fit. 


Ducati On Line thanks its sponsor and friend, Cycle Cat, maker of
some of the most beautiful products ever for Ducati's.
Visit http://www.cyclecat.com/

_______________________________________________
Ducati mailing list
Ducati at ducati.net
http://list.ducati.net/cgi-bin/mailman/listinfo/ducati
Mailto: bigredxrunner at yahoo.com

Ducati On Line thanks its sponsor and friend, Cycle Cat, maker of  
some of the most beautiful products ever for Ducati's.
Visit http://www.cyclecat.com/

_______________________________________________
Ducati mailing list
Ducati at ducati.net
http://list.ducati.net/cgi-bin/mailman/listinfo/ducati
Mailto: dirk.wright at uspto.gov