[Ducati] 2000 748 problems

[Douglas Krekler]

Best to use an impact wrench to loosen both the flywheel and clutch nuts.

Hans Christenson <baconsprays at hotmail.com> wrote:  Im taking apart my 2000 748 and am slowly turning it into a race bike.  I am 
having problems getting the large nut off of the flywheel.  I think its 
about 30mm but am not sure.  I have a belt wrench to grip the flywheel.  But 
it seems to not want to budge.  This is also true for the clutch bolt that 
holds the cage on.  I was just wondering if there were any tricks to these 
two bolts.  I plan on dropping the engine and want to bore it out to a 850, 
so any help from people who have done this would be great.
Also if there are any riders in the Seattle area that want to ride let me 
know, I just moved up here and dont know any other Duc riders
Thanks,
Hans
Kirkland, Washington USA



Ducati On Line thanks its sponsor and friend, Cycle Cat, maker of  
some of the most beautiful products ever for Ducati's.
Visit http://www.cyclecat.com/

_______________________________________________
Ducati mailing list
Ducati at ducati.net
http://list.ducati.net/cgi-bin/mailman/listinfo/ducati
Mailto: dkrekler at sbcglobal.net